Designed for both Tees and Greens the SMARTCut Cutting Cassette offers unrivalled versatility and ease of maintenance with a bedknife adjustment to a fixed position cylinder to achieve consistency and quality of cut. 7 and 11 blade options are available to give a cutting height range of 1.6mm to 25mm (0.06in to 1in), all of which provide superb results in all situations. There is an optional (patent pending) powered rear roller brush for the chassis which, when combined with the SMARTCut™ cutting cassette, sees a power requirement of only a fraction of any other unit on the market. This power saving is a massive bonus for anyone driving their cutting units with electric motors, or just wanting to use less fuel. Groomer attachment The optional Groomer attachment can be installed and removed in rapid fashion. It has a fully sealed gearbox and is designed for single lever action to give simple engagement or disengagement. The Groomer contra rotates to achieve the maximum effect in alleviating grain and turf density problems. The SMARTCut indexing bedknife to cylinder adjusters make for simple and accurate setting of cut. The spring loaded design ensures cut quality is maintained during operation. Indexing bedknife adjuster Eccentric adjusters on the bedblock allow fine adjustment. Positioning the bedknife forward or behind the reel centre is now a simple procedure that gives you complete control over the type of cut you prefer. Eccentric adjuster Even those units previously marketed as TurfWorks™ can accept this new cutting cassette and upgrade kit.